What is the installation method of the ice maker?

1. Placement of the ice maker
⑴The machine should be placed in a safe and clean place with good air circulation.
⑵The machine should not be placed in the open air, and should not be exposed to direct sunlight and rain. Keep the surrounding area away from heat sources.
⑶The operating environment of the machine cannot be lower than 5℃ and not higher than 38℃.
⑷ There should be enough space around the machine, especially the rear side should not be less than 150mm. So that the machine can dissipate heat.
⑸ Please adjust the anchor bolts at the bottom of the machine to ensure that the machine is placed horizontally and stably.
2. Installation of water system
⑴ Please connect to a water source that meets the local drinking water standard.
⑵Connect the filter when necessary to improve the drinking standard of water.
⑶The water supply system must meet the following conditions:
a. The minimum water temperature is 2℃ and the maximum does not exceed 38℃
b. The lowest water pressure is 0.02Mpa and the highest is 0.8Mpa
3. Installation of power supply
⑴The power supply must be the same as that marked on the nameplate of the machine.
⑵All lines must comply with national standards.
⑶ It must be grounded reliably, and the grounding wire must comply with electrical standards.
⑷The voltage fluctuation shall not exceed ±10% of the rated voltage.